replicaset controller是kube-controller-manager组件中众多控制器中的一个，是 replicaset 资源对象的控制器，其通过对replicaset、pod 2种资源的监听，完成replicaset期望副本数的调谐。

replicaset controller分析

replicaset controller简介

replicaset controller是kube-controller-manager组件中众多控制器中的一个，是 replicaset 资源对象的控制器，其通过对replicaset、pod 2种资源的监听，当这2种资源发生变化时会触发 replicaset controller 对相应的replicaset对象进行调谐操作，从而完成replicaset期望副本数的调谐，当实际pod的数量未达到预期时创建pod，当实际pod的数量超过预期时删除pod。

replicaset controller主要作用是根据replicaset对象所期望的pod数量与现存pod数量做比较，然后根据比较结果创建/删除pod，最终使得replicaset对象所期望的pod数量与现存pod数量相等。

replicaset controller架构图

replicaset controller的大致组成和处理流程如下图，replicaset controller对pod和replicaset对象注册了event handler，当有事件时，会watch到然后将对应的replicaset对象放入到queue中，然后syncReplicaSet方法为replicaset controller调谐replicaset对象的核心处理逻辑所在，从queue中取出replicaset对象，做调谐处理。

replicaset controller分析将分为3大块进行，分别是：
（1）replicaset controller初始化和启动分析；
（2）replicaset controller核心处理逻辑分析；
（3）replicaset controller expectations机制分析。

本篇博客先进行replicaset controller初始化和启动分析。

ReplicaSetController的初始化与启动分析

基于tag v1.17.4

https://github.com/kubernetes/kubernetes/releases/tag/v1.17.4

直接以startReplicaSetController函数作为garbage collector的初始化与启动源码分析入口。

startReplicaSetController中调用了replicaset.NewReplicaSetController来进行ReplicaSetController的初始化，初始化完成后调用Run进行启动。

这里留意传入Run方法的参数ctx.ComponentConfig.ReplicaSetController.ConcurrentRSSyncs，后面会详细分析。

// cmd/kube-controller-manager/app/apps.go
func startReplicaSetController(ctx ControllerContext) (http.Handler, bool, error) {
	if !ctx.AvailableResources[schema.GroupVersionResource{Group: "apps", Version: "v1", Resource: "replicasets"}] {
		return nil, false, nil
	}
	go replicaset.NewReplicaSetController(
		ctx.InformerFactory.Apps().V1().ReplicaSets(),
		ctx.InformerFactory.Core().V1().Pods(),
		ctx.ClientBuilder.ClientOrDie("replicaset-controller"),
		replicaset.BurstReplicas,
	).Run(int(ctx.ComponentConfig.ReplicaSetController.ConcurrentRSSyncs), ctx.Stop)
	return nil, true, nil
}

初始化分析

分析入口 NewReplicaSetController

NewReplicaSetController主要是初始化ReplicaSetController，定义replicaset与pod对象的informer，并注册EventHandler-AddFunc、UpdateFunc与DeleteFunc等，用于监听replicaset与pod对象的变动。

// pkg/controller/replicaset/replica_set.go
// NewReplicaSetController configures a replica set controller with the specified event recorder
func NewReplicaSetController(rsInformer appsinformers.ReplicaSetInformer, podInformer coreinformers.PodInformer, kubeClient clientset.Interface, burstReplicas int) *ReplicaSetController {
	eventBroadcaster := record.NewBroadcaster()
	eventBroadcaster.StartLogging(klog.Infof)
	eventBroadcaster.StartRecordingToSink(&v1core.EventSinkImpl{Interface: kubeClient.CoreV1().Events("")})
	return NewBaseController(rsInformer, podInformer, kubeClient, burstReplicas,
		apps.SchemeGroupVersion.WithKind("ReplicaSet"),
		"replicaset_controller",
		"replicaset",
		controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventBroadcaster.NewRecorder(scheme.Scheme, v1.EventSource{Component: "replicaset-controller"}),
		},
	)
}

// NewBaseController is the implementation of NewReplicaSetController with additional injected
// parameters so that it can also serve as the implementation of NewReplicationController.
func NewBaseController(rsInformer appsinformers.ReplicaSetInformer, podInformer coreinformers.PodInformer, kubeClient clientset.Interface, burstReplicas int,
	gvk schema.GroupVersionKind, metricOwnerName, queueName string, podControl controller.PodControlInterface) *ReplicaSetController {
	if kubeClient != nil && kubeClient.CoreV1().RESTClient().GetRateLimiter() != nil {
		ratelimiter.RegisterMetricAndTrackRateLimiterUsage(metricOwnerName, kubeClient.CoreV1().RESTClient().GetRateLimiter())
	}

	rsc := &ReplicaSetController{
		GroupVersionKind: gvk,
		kubeClient:       kubeClient,
		podControl:       podControl,
		burstReplicas:    burstReplicas,
		expectations:     controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
		queue:            workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), queueName),
	}

	rsInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc:    rsc.addRS,
		UpdateFunc: rsc.updateRS,
		DeleteFunc: rsc.deleteRS,
	})
	rsc.rsLister = rsInformer.Lister()
	rsc.rsListerSynced = rsInformer.Informer().HasSynced

	podInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc: rsc.addPod,
		// This invokes the ReplicaSet for every pod change, eg: host assignment. Though this might seem like
		// overkill the most frequent pod update is status, and the associated ReplicaSet will only list from
		// local storage, so it should be ok.
		UpdateFunc: rsc.updatePod,
		DeleteFunc: rsc.deletePod,
	})
	rsc.podLister = podInformer.Lister()
	rsc.podListerSynced = podInformer.Informer().HasSynced

	rsc.syncHandler = rsc.syncReplicaSet

	return rsc
}

queue

queue是replicaset controller做sync操作的关键。当replicaset或pod对象发生改变，其对应的EventHandler会把该对象往queue中加入，而replicaset controller的Run方法中调用的rsc.worker（后面再做分析）会从queue中获取对象并做相应的调谐操作。

queue中存放的对象格式：namespace/name

type ReplicaSetController struct {
    ...

	// Controllers that need to be synced
	queue workqueue.RateLimitingInterface
}

queue的来源是replicaset与pod对象的EventHandler，下面来一个个分析。

1 rsc.addRS

当发现有新增的replicaset对象，会调用该方法。

主要逻辑：调用rsc.enqueueRS将该对象加入queue中。

// pkg/controller/replicaset/replica_set.go
func (rsc *ReplicaSetController) addRS(obj interface{}) {
	rs := obj.(*apps.ReplicaSet)
	klog.V(4).Infof("Adding %s %s/%s", rsc.Kind, rs.Namespace, rs.Name)
	rsc.enqueueRS(rs)
}

rsc.enqueueRS

组装key，将key加入queue。

func (rsc *ReplicaSetController) enqueueRS(rs *apps.ReplicaSet) {
	key, err := controller.KeyFunc(rs)
	if err != nil {
		utilruntime.HandleError(fmt.Errorf("couldn't get key for object %#v: %v", rs, err))
		return
	}

	rsc.queue.Add(key)
}

2 rsc.updateRS

当发现replicaset对象有更改，会调用该方法。

主要逻辑：
（1）如果新旧replicaset对象的uid不一致，则调用rsc.deleteRS（rsc.deleteRS在后面分析）；
（2）调用rsc.enqueueRS，组装key，将key加入queue。

// pkg/controller/replicaset/replica_set.go
func (rsc *ReplicaSetController) updateRS(old, cur interface{}) {
	oldRS := old.(*apps.ReplicaSet)
	curRS := cur.(*apps.ReplicaSet)

	// TODO: make a KEP and fix informers to always call the delete event handler on re-create
	if curRS.UID != oldRS.UID {
		key, err := controller.KeyFunc(oldRS)
		if err != nil {
			utilruntime.HandleError(fmt.Errorf("couldn't get key for object %#v: %v", oldRS, err))
			return
		}
		rsc.deleteRS(cache.DeletedFinalStateUnknown{
			Key: key,
			Obj: oldRS,
		})
	}

	// You might imagine that we only really need to enqueue the
	// replica set when Spec changes, but it is safer to sync any
	// time this function is triggered. That way a full informer
	// resync can requeue any replica set that don't yet have pods
	// but whose last attempts at creating a pod have failed (since
	// we don't block on creation of pods) instead of those
	// replica sets stalling indefinitely. Enqueueing every time
	// does result in some spurious syncs (like when Status.Replica
	// is updated and the watch notification from it retriggers
	// this function), but in general extra resyncs shouldn't be
	// that bad as ReplicaSets that haven't met expectations yet won't
	// sync, and all the listing is done using local stores.
	if *(oldRS.Spec.Replicas) != *(curRS.Spec.Replicas) {
		klog.V(4).Infof("%v %v updated. Desired pod count change: %d->%d", rsc.Kind, curRS.Name, *(oldRS.Spec.Replicas), *(curRS.Spec.Replicas))
	}
	rsc.enqueueRS(curRS)
}

3 rsc.deleteRS

当发现replicaset对象被删除，会调用该方法。

主要逻辑：
（1）调用rsc.expectations.DeleteExpectations方法删除该rs的expectations（关于expectations机制，会在后面单独进行分析，这里有个印象就行）；
（2）组装key，放入queue中。

// pkg/controller/replicaset/replica_set.go
func (rsc *ReplicaSetController) deleteRS(obj interface{}) {
	rs, ok := obj.(*apps.ReplicaSet)
	if !ok {
		tombstone, ok := obj.(cache.DeletedFinalStateUnknown)
		if !ok {
			utilruntime.HandleError(fmt.Errorf("couldn't get object from tombstone %#v", obj))
			return
		}
		rs, ok = tombstone.Obj.(*apps.ReplicaSet)
		if !ok {
			utilruntime.HandleError(fmt.Errorf("tombstone contained object that is not a ReplicaSet %#v", obj))
			return
		}
	}

	key, err := controller.KeyFunc(rs)
	if err != nil {
		utilruntime.HandleError(fmt.Errorf("couldn't get key for object %#v: %v", rs, err))
		return
	}

	klog.V(4).Infof("Deleting %s %q", rsc.Kind, key)

	// Delete expectations for the ReplicaSet so if we create a new one with the same name it starts clean
	rsc.expectations.DeleteExpectations(key)

	rsc.queue.Add(key)
}

4 rsc.addPod

当发现有新增的pod对象，会调用该方法。

主要逻辑：
（1）如果pod的DeletionTimestamp属性不为空，则调用rsc.deletePod（后面再做分析），然后返回；
（2）调用metav1.GetControllerOf获取该pod对象的OwnerReference，并判断该pod是否有上层controller，有则再调用rsc.resolveControllerRef查询该pod所属的replicaset是否存在，不存在则直接返回；
（3）调用rsc.expectations.CreationObserved方法，将该rs的expectations期望创建pod数量减1（关于expectations机制，会在后面单独进行分析，这里有个印象就行）；
（4）组装key，放入queue中。

注意：pod的eventHandler处理逻辑依然是将pod对应的replicaset对象加入queue中，而不是将pod加入到queue中。

// pkg/controller/replicaset/replica_set.go
func (rsc *ReplicaSetController) addPod(obj interface{}) {
	pod := obj.(*v1.Pod)

	if pod.DeletionTimestamp != nil {
		// on a restart of the controller manager, it's possible a new pod shows up in a state that
		// is already pending deletion. Prevent the pod from being a creation observation.
		rsc.deletePod(pod)
		return
	}

	// If it has a ControllerRef, that's all that matters.
	if controllerRef := metav1.GetControllerOf(pod); controllerRef != nil {
		rs := rsc.resolveControllerRef(pod.Namespace, controllerRef)
		if rs == nil {
			return
		}
		rsKey, err := controller.KeyFunc(rs)
		if err != nil {
			return
		}
		klog.V(4).Infof("Pod %s created: %#v.", pod.Name, pod)
		rsc.expectations.CreationObserved(rsKey)
		rsc.queue.Add(rsKey)
		return
	}

	// Otherwise, it's an orphan. Get a list of all matching ReplicaSets and sync
	// them to see if anyone wants to adopt it.
	// DO NOT observe creation because no controller should be waiting for an
	// orphan.
	rss := rsc.getPodReplicaSets(pod)
	if len(rss) == 0 {
		return
	}
	klog.V(4).Infof("Orphan Pod %s created: %#v.", pod.Name, pod)
	for _, rs := range rss {
		rsc.enqueueRS(rs)
	}
}

5 rsc.updatePod

当发现有pod对象发生更改，会调用该方法。

主要逻辑：
（1）判断新旧pod的ResourceVersion，如一致，代表无变化，直接返回；
（2）如果pod的DeletionTimestamp不为空，则调用rsc.deletePod（后面再做分析），然后返回；
（3）...

// pkg/controller/replicaset/replica_set.go
func (rsc *ReplicaSetController) updatePod(old, cur interface{}) {
	curPod := cur.(*v1.Pod)
	oldPod := old.(*v1.Pod)
	if curPod.ResourceVersion == oldPod.ResourceVersion {
		// Periodic resync will send update events for all known pods.
		// Two different versions of the same pod will always have different RVs.
		return
	}

	labelChanged := !reflect.DeepEqual(curPod.Labels, oldPod.Labels)
	if curPod.DeletionTimestamp != nil {
		// when a pod is deleted gracefully it's deletion timestamp is first modified to reflect a grace period,
		// and after such time has passed, the kubelet actually deletes it from the store. We receive an update
		// for modification of the deletion timestamp and expect an rs to create more replicas asap, not wait
		// until the kubelet actually deletes the pod. This is different from the Phase of a pod changing, because
		// an rs never initiates a phase change, and so is never asleep waiting for the same.
		rsc.deletePod(curPod)
		if labelChanged {
			// we don't need to check the oldPod.DeletionTimestamp because DeletionTimestamp cannot be unset.
			rsc.deletePod(oldPod)
		}
		return
	}

	curControllerRef := metav1.GetControllerOf(curPod)
	oldControllerRef := metav1.GetControllerOf(oldPod)
	controllerRefChanged := !reflect.DeepEqual(curControllerRef, oldControllerRef)
	if controllerRefChanged && oldControllerRef != nil {
		// The ControllerRef was changed. Sync the old controller, if any.
		if rs := rsc.resolveControllerRef(oldPod.Namespace, oldControllerRef); rs != nil {
			rsc.enqueueRS(rs)
		}
	}

	// If it has a ControllerRef, that's all that matters.
	if curControllerRef != nil {
		rs := rsc.resolveControllerRef(curPod.Namespace, curControllerRef)
		if rs == nil {
			return
		}
		klog.V(4).Infof("Pod %s updated, objectMeta %+v -> %+v.", curPod.Name, oldPod.ObjectMeta, curPod.ObjectMeta)
		rsc.enqueueRS(rs)
		// TODO: MinReadySeconds in the Pod will generate an Available condition to be added in
		// the Pod status which in turn will trigger a requeue of the owning replica set thus
		// having its status updated with the newly available replica. For now, we can fake the
		// update by resyncing the controller MinReadySeconds after the it is requeued because
		// a Pod transitioned to Ready.
		// Note that this still suffers from #29229, we are just moving the problem one level
		// "closer" to kubelet (from the deployment to the replica set controller).
		if !podutil.IsPodReady(oldPod) && podutil.IsPodReady(curPod) && rs.Spec.MinReadySeconds > 0 {
			klog.V(2).Infof("%v %q will be enqueued after %ds for availability check", rsc.Kind, rs.Name, rs.Spec.MinReadySeconds)
			// Add a second to avoid milliseconds skew in AddAfter.
			// See https://github.com/kubernetes/kubernetes/issues/39785#issuecomment-279959133 for more info.
			rsc.enqueueRSAfter(rs, (time.Duration(rs.Spec.MinReadySeconds)*time.Second)+time.Second)
		}
		return
	}

	// Otherwise, it's an orphan. If anything changed, sync matching controllers
	// to see if anyone wants to adopt it now.
	if labelChanged || controllerRefChanged {
		rss := rsc.getPodReplicaSets(curPod)
		if len(rss) == 0 {
			return
		}
		klog.V(4).Infof("Orphan Pod %s updated, objectMeta %+v -> %+v.", curPod.Name, oldPod.ObjectMeta, curPod.ObjectMeta)
		for _, rs := range rss {
			rsc.enqueueRS(rs)
		}
	}
}

6 rsc.deletePod

当发现有pod对象被删除，会调用该方法。

主要逻辑：
（1）调用metav1.GetControllerOf获取该pod对象的OwnerReference，并判断是否是controller，是则再调用rsc.resolveControllerRef查询该pod所属的replicaset是否存在，不存在则直接返回；
（2）调用rsc.expectations.DeletionObserved方法，将该rs的expectations期望删除pod数量减1（关于expectations机制，会在后面单独进行分析，这里有个印象就行）；
（3）组装key，放入queue中。

// pkg/controller/replicaset/replica_set.go
func (rsc *ReplicaSetController) deletePod(obj interface{}) {
	pod, ok := obj.(*v1.Pod)

	// When a delete is dropped, the relist will notice a pod in the store not
	// in the list, leading to the insertion of a tombstone object which contains
	// the deleted key/value. Note that this value might be stale. If the pod
	// changed labels the new ReplicaSet will not be woken up till the periodic resync.
	if !ok {
		tombstone, ok := obj.(cache.DeletedFinalStateUnknown)
		if !ok {
			utilruntime.HandleError(fmt.Errorf("couldn't get object from tombstone %+v", obj))
			return
		}
		pod, ok = tombstone.Obj.(*v1.Pod)
		if !ok {
			utilruntime.HandleError(fmt.Errorf("tombstone contained object that is not a pod %#v", obj))
			return
		}
	}

	controllerRef := metav1.GetControllerOf(pod)
	if controllerRef == nil {
		// No controller should care about orphans being deleted.
		return
	}
	rs := rsc.resolveControllerRef(pod.Namespace, controllerRef)
	if rs == nil {
		return
	}
	rsKey, err := controller.KeyFunc(rs)
	if err != nil {
		utilruntime.HandleError(fmt.Errorf("couldn't get key for object %#v: %v", rs, err))
		return
	}
	klog.V(4).Infof("Pod %s/%s deleted through %v, timestamp %+v: %#v.", pod.Namespace, pod.Name, utilruntime.GetCaller(), pod.DeletionTimestamp, pod)
	rsc.expectations.DeletionObserved(rsKey, controller.PodKey(pod))
	rsc.queue.Add(rsKey)
}

启动分析

分析入口 Run

根据workers的值启动相应数量的goroutine，循环调用rsc.worker，从queue中取出一个key做replicaset资源对象的调谐处理。

// pkg/controller/replicaset/replica_set.go

// Run begins watching and syncing.
func (rsc *ReplicaSetController) Run(workers int, stopCh <-chan struct{}) {
	defer utilruntime.HandleCrash()
	defer rsc.queue.ShutDown()

	controllerName := strings.ToLower(rsc.Kind)
	glog.Infof("Starting %v controller", controllerName)
	defer glog.Infof("Shutting down %v controller", controllerName)

	if !controller.WaitForCacheSync(rsc.Kind, stopCh, rsc.podListerSynced, rsc.rsListerSynced) {
		return
	}

	for i := 0; i < workers; i++ {
		go wait.Until(rsc.worker, time.Second, stopCh)
	}

	<-stopCh
}

此处的workers参数由startReplicaSetController方法中传入，值为ctx.ComponentConfig.ReplicaSetController.ConcurrentRSSyncs，它的值实际由kube-controller-manager组件的concurrent-replicaset-syncs启动参数决定，当不配置时，默认值设置为5，代表会起5个goroutine来并行处理和调谐队列中的replicaset对象。

下面来看一下kube-controller-manager组件中replicaset controller相关的concurrent-replicaset-syncs启动参数。

ReplicaSetControllerOptions

// cmd/kube-controller-manager/app/options/replicasetcontroller.go
// ReplicaSetControllerOptions holds the ReplicaSetController options.
type ReplicaSetControllerOptions struct {
	*replicasetconfig.ReplicaSetControllerConfiguration
}

// AddFlags adds flags related to ReplicaSetController for controller manager to the specified FlagSet.
func (o *ReplicaSetControllerOptions) AddFlags(fs *pflag.FlagSet) {
	if o == nil {
		return
	}

	fs.Int32Var(&o.ConcurrentRSSyncs, "concurrent-replicaset-syncs", o.ConcurrentRSSyncs, "The number of replica sets that are allowed to sync concurrently. Larger number = more responsive replica management, but more CPU (and network) load")
}

// ApplyTo fills up ReplicaSetController config with options.
func (o *ReplicaSetControllerOptions) ApplyTo(cfg *replicasetconfig.ReplicaSetControllerConfiguration) error {
	if o == nil {
		return nil
	}

	cfg.ConcurrentRSSyncs = o.ConcurrentRSSyncs

	return nil
}

默认值设置

concurrent-replicaset-syncs参数默认值配置为5。

// pkg/controller/apis/config/v1alpha1/register.go
func init() {
	// We only register manually written functions here. The registration of the
	// generated functions takes place in the generated files. The separation
	// makes the code compile even when the generated files are missing.
	localSchemeBuilder.Register(addDefaultingFuncs)
}

// pkg/controller/apis/config/v1alpha1/defaults.go
func addDefaultingFuncs(scheme *kruntime.Scheme) error {
	return RegisterDefaults(scheme)
}

// pkg/controller/apis/config/v1alpha1/zz_generated.defaults.go
func RegisterDefaults(scheme *runtime.Scheme) error {
	scheme.AddTypeDefaultingFunc(&v1alpha1.KubeControllerManagerConfiguration{}, func(obj interface{}) {
		SetObjectDefaults_KubeControllerManagerConfiguration(obj.(*v1alpha1.KubeControllerManagerConfiguration))
	})
	return nil
}

func SetObjectDefaults_KubeControllerManagerConfiguration(in *v1alpha1.KubeControllerManagerConfiguration) {
	SetDefaults_KubeControllerManagerConfiguration(in)
	SetDefaults_KubeCloudSharedConfiguration(&in.KubeCloudShared)
}

// pkg/controller/apis/config/v1alpha1/defaults.go
func SetDefaults_KubeControllerManagerConfiguration(obj *kubectrlmgrconfigv1alpha1.KubeControllerManagerConfiguration) {
    ...
    // Use the default RecommendedDefaultReplicaSetControllerConfiguration options
	replicasetconfigv1alpha1.RecommendedDefaultReplicaSetControllerConfiguration(&obj.ReplicaSetController)
    ...
}

// pkg/controller/replicaset/config/v1alpha1/defaults.go
func RecommendedDefaultReplicaSetControllerConfiguration(obj *kubectrlmgrconfigv1alpha1.ReplicaSetControllerConfiguration) {
	if obj.ConcurrentRSSyncs == 0 {
		obj.ConcurrentRSSyncs = 5
	}
}

分析完replicaset controller启动参数后，来看一下启动后调用的核心处理方法。

1 rsc.worker

前面提到，在replicaset controller的Run方法中，会根据workers的值启动相应数量的goroutine，循环调用rsc.worker，从queue中取出一个key做replicaset资源对象的调谐处理。

rsc.worker主要逻辑：
（1）从queue中获取一个key；
（2）调用rsc.syncHandler对该key做进一步处理；
（3）从queue中去除该key。

// worker runs a worker thread that just dequeues items, processes them, and marks them done.
// It enforces that the syncHandler is never invoked concurrently with the same key.
func (rsc *ReplicaSetController) worker() {
	for rsc.processNextWorkItem() {
	}
}

func (rsc *ReplicaSetController) processNextWorkItem() bool {
	key, quit := rsc.queue.Get()
	if quit {
		return false
	}
	defer rsc.queue.Done(key)

	err := rsc.syncHandler(key.(string))
	if err == nil {
		rsc.queue.Forget(key)
		return true
	}

	utilruntime.HandleError(fmt.Errorf("Sync %q failed with %v", key, err))
	rsc.queue.AddRateLimited(key)

	return true
}

1.1 rsc.syncHandler

调用rsc.syncHandler实际为调用rsc.syncReplicaSet方法，rsc.syncHandler在NewBaseController中被赋值为rsc.syncReplicaSet，后续分析核心处理逻辑时再具体分析rsc.syncHandler，此处不做深入分析。

// NewBaseController is the implementation of NewReplicaSetController with additional injected
// parameters so that it can also serve as the implementation of NewReplicationController.
func NewBaseController(rsInformer appsinformers.ReplicaSetInformer, podInformer coreinformers.PodInformer, kubeClient clientset.Interface, burstReplicas int,
	gvk schema.GroupVersionKind, metricOwnerName, queueName string, podControl controller.PodControlInterface) *ReplicaSetController {
	
	...

	rsc.syncHandler = rsc.syncReplicaSet

	return rsc
}

总结

replicaset controller是kube-controller-manager组件中众多控制器中的一个，是 replicaset 资源对象的控制器，其通过对replicaset、pod 2种资源的监听，当这2种资源发生变化时会触发 replicaset controller 对相应的replicaset对象进行调谐操作，从而完成replicaset期望副本数的调谐，当实际pod的数量未达到预期时创建pod，当实际pod的数量超过预期时删除pod。

本篇博客对replicaset controller的初始化和启动做了分析，其中对replicaset controller注册的pod和replicaet对象的event handler做了代码分析，以及replicaset controller如何启动，注册了什么方法作为核心处理逻辑方法做了分析与介绍。

replicaset controller架构图

replicaset controller的大致组成和处理流程如下图，replicaset controller对pod和replicaset对象注册了event handler，当有事件时，会watch到然后将对应的replicaset对象放入到queue中，然后syncReplicaSet方法为replicaset controller调谐replicaset对象的核心处理逻辑所在，从queue中取出replicaset对象，做调谐处理。

接下来的两篇博客，会依次给大家做replicaset controller的核心处理逻辑以及expectations机制的分析，敬请期待。